cpgreport

 

Function

Reports all CpG rich regions

Description

cpgreport scans a nucleotide sequence for regions with higher than expected frequencies of the dinucleotide CG.

CpG refers to a C nucleotide immediately followed by a G. The 'p' in 'CpG' refers to the phosphate group linking the two bases.

Detection of regions of genomic sequences that are rich in the CpG pattern is important because such regions are resistant to methylation and tend to be associated with genes which are frequently switched on. Regions rich in the CpG pattern are known as CpG islands.

This program does not find CpG islands as normally defined: "a region of greater than 200 bp with a %GC of greater than 50% and observed/expected CpG > 0.6". cpgreport instead uses a running sum rather than a window to create the score as follows: if not CpG at position i, then decrement running-Sum counter, but if CpG then running-Sum counter is incremented by the CPGSCORE. Spans greater than the threshold are searched for recursively.

This method overpredicts islands but finds the smaller ones around primary exons.

Usage

Here is a sample session with cpgreport


% cpgreport tembl:u68037 
Reports all CpG rich regions
CpG score [17]: 
Output file [u68037.cpgreport]: 
Features output [u68037.gff]: 

Go to the input files for this example
Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers:
  [-sequence]          seqall     Nucleotide sequence(s) filename and optional
                                  format, or reference (input USA)
   -score              integer    [17] This sets the score for each CG
                                  sequence found. A value of 17 is more
                                  sensitive, but 28 has also been used with
                                  some success. (Integer from 1 to 200)
  [-outfile]           outfile    [*.cpgreport] Output file name
  [-outfeat]           featout    [unknown.gff] File for output features

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -odirectory2        string     Output directory

   "-outfeat" associated qualifiers
   -offormat3          string     Output feature format
   -ofopenfile3        string     Features file name
   -ofextension3       string     File name extension
   -ofdirectory3       string     Output directory
   -ofname3            string     Base file name
   -ofsingle3          boolean    Separate file for each entry

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write standard output
   -filter             boolean    Read standard input, write standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages

Standard (Mandatory) qualifiers Allowed values Default
[-sequence]
(Parameter 1)
Nucleotide sequence(s) filename and optional format, or reference (input USA) Readable sequence(s) Required
-score This sets the score for each CG sequence found. A value of 17 is more sensitive, but 28 has also been used with some success. Integer from 1 to 200 17
[-outfile]
(Parameter 2)
Output file name Output file <*>.cpgreport
[-outfeat]
(Parameter 3)
File for output features Writeable feature table unknown.gff
Additional (Optional) qualifiers Allowed values Default
(none)
Advanced (Unprompted) qualifiers Allowed values Default
(none)

Input file format

Any DNA sequence USA.

Input files for usage example

'tembl:u68037' is a sequence entry in the example nucleic acid database 'tembl'

Database entry: tembl:u68037

ID   U68037; SV 1; linear; mRNA; STD; ROD; 1218 BP.
XX
AC   U68037;
XX
DT   23-SEP-1996 (Rel. 49, Created)
DT   04-MAR-2000 (Rel. 63, Last updated, Version 2)
XX
DE   Rattus norvegicus EP1 prostanoid receptor mRNA, complete cds.
XX
KW   .
XX
OS   Rattus norvegicus (Norway rat)
OC   Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; Mammalia;
OC   Eutheria; Euarchontoglires; Glires; Rodentia; Sciurognathi; Muroidea;
OC   Muridae; Murinae; Rattus.
XX
RN   [1]
RP   1-1218
RA   Abramovitz M., Boie Y.;
RT   "Cloning of the rat EP1 prostanoid receptor";
RL   Unpublished.
XX
RN   [2]
RP   1-1218
RA   Abramovitz M., Boie Y.;
RT   ;
RL   Submitted (26-AUG-1996) to the EMBL/GenBank/DDBJ databases.
RL   Biochemistry & Molecular Biology, Merck Frosst Center for Therapeutic
RL   Research, P. O. Box 1005, Pointe Claire - Dorval, Quebec H9R 4P8, Canada
XX
FH   Key             Location/Qualifiers
FH
FT   source          1..1218
FT                   /organism="Rattus norvegicus"
FT                   /strain="Sprague-Dawley"
FT                   /mol_type="mRNA"
FT                   /db_xref="taxon:10116"
FT   CDS             1..1218
FT                   /codon_start=1
FT                   /product="EP1 prostanoid receptor"
FT                   /note="family 1 G-protein coupled receptor"
FT                   /db_xref="GOA:P70597"
FT                   /db_xref="InterPro:IPR000276"
FT                   /db_xref="InterPro:IPR000708"
FT                   /db_xref="InterPro:IPR001244"
FT                   /db_xref="InterPro:IPR008365"
FT                   /db_xref="UniProtKB/Swiss-Prot:P70597"
FT                   /protein_id="AAB07735.1"
FT                   /translation="MSPYGLNLSLVDEATTCVTPRVPNTSVVLPTGGNGTSPALPIFSM
FT                   TLGAVSNVLALALLAQVAGRLRRRRSTATFLLFVASLLAIDLAGHVIPGALVLRLYTAG
FT                   RAPAGGACHFLGGCMVFFGLCPLLLGCGMAVERCVGVTQPLIHAARVSVARARLALALL
FT                   AAMALAVALLPLVHVGHYELQYPGTWCFISLGPPGGWRQALLAGLFAGLGLAALLAALV
FT                   CNTLSGLALLRARWRRRRSRRFRENAGPDDRRRWGSRGLRLASASSASSITSTTAALRS
FT                   SRGGGSARRVHAHDVEMVGQLVGIMVVSCICWSPLLVLVVLAIGGWNSNSLQRPLFLAV
FT                   RLASWNQILDPWVYILLRQAMLRQLLRLLPLRVSAKGGPTELSLTKSAWEASSLRSSRH
FT                   SGFSHL"
XX
SQ   Sequence 1218 BP; 162 A; 397 C; 387 G; 272 T; 0 other;
     atgagcccct acgggcttaa cctgagccta gtggatgagg caacaacgtg tgtaacaccc        60
     agggtcccca atacatctgt ggtgctgcca acaggcggta acggcacatc accagcgctg       120
     cctatcttct ccatgacgct gggtgctgtg tccaacgtgc tggcgctggc gctgctggcc       180
     caggttgcag gcagactgcg gcgccgccgc tcgactgcca ccttcctgtt gttcgtcgcc       240
     agcctgcttg ccatcgacct agcaggccat gtgatcccgg gcgccttggt gcttcgcctg       300
     tatactgcag gacgtgcgcc cgctggcggg gcctgtcatt tcctgggcgg ctgtatggtc       360
     ttctttggcc tgtgcccact tttgcttggc tgtggcatgg ccgtggagcg ctgcgtgggt       420
     gtcacgcagc cgctgatcca cgcggcgcgc gtgtccgtag cccgcgcacg cctggcacta       480
     gccctgctgg ccgccatggc tttggcagtg gcgctgctgc cactagtgca cgtgggtcac       540
     tacgagctac agtaccctgg cacttggtgt ttcattagcc ttgggcctcc tggaggttgg       600
     cgccaggcgt tgcttgcggg cctcttcgcc ggccttggcc tggctgcgct ccttgccgca       660
     ctagtgtgta atacgctcag cggcctggcg ctccttcgtg cccgctggag gcggcgtcgc       720
     tctcgacgtt tccgagagaa cgcaggtccc gatgatcgcc ggcgctgggg gtcccgtgga       780
     ctccgcttgg cctccgcctc gtctgcgtca tccatcactt caaccacagc tgccctccgc       840
     agctctcggg gaggcggctc cgcgcgcagg gttcacgcac acgacgtgga aatggtgggc       900
     cagctcgtgg gcatcatggt ggtgtcgtgc atctgctgga gccccctgct ggtattggtg       960
     gtgttggcca tcgggggctg gaactctaac tccctgcagc ggccgctctt tctggctgta      1020
     cgcctcgcgt cgtggaacca gatcctggac ccatgggtgt acatcctgct gcgccaggct      1080
     atgctgcgcc aacttcttcg cctcctaccc ctgagggtta gtgccaaggg tggtccaacg      1140
     gagctgagcc taaccaagag tgcctgggag gccagttcac tgcgtagctc ccggcacagt      1200
     ggcttcagcc acttgtga                                                    1218
//

Output file format

Output files for usage example

File: u68037.cpgreport



CPGREPORT of U68037 from 1 to 1218

Sequence              Begin    End Score        CpG   %CG  CG/GC
U68037                   12     13    17          1 100.0    -
U68037                   47     48    17          1 100.0    -
U68037                   96   1032   630         87  66.1   0.65
U68037                 1072   1100    26          3  62.1   0.00
U68037                 1139   1140    17          1 100.0    -
U68037                 1183   1193    26          2  72.7   2.00

File: u68037.gff

##gff-version 2.0
##date 2006-07-15
##Type DNA U68037
U68037	cpgreport	misc_feature	12	13	17.000	+	.	Sequence "U68037.1"
U68037	cpgreport	misc_feature	47	48	17.000	+	.	Sequence "U68037.2"
U68037	cpgreport	misc_feature	96	1032	630.000	+	.	Sequence "U68037.3"
U68037	cpgreport	misc_feature	1072	1100	26.000	+	.	Sequence "U68037.4"
U68037	cpgreport	misc_feature	1139	1140	17.000	+	.	Sequence "U68037.5"
U68037	cpgreport	misc_feature	1183	1193	26.000	+	.	Sequence "U68037.6"

The first non-blank line of the output file 'rnu68037.cpgreport' is the title line giving the program name, the name of sequence being analysed and the start and end positions of the sequence.

The second non-blank line contains the headings of the columns.

Subsequent lines contain columns with the following information:

If the count of GpC in the region is zero, then the ratio of CG/GC is reported as '-'.

Data files

None.

Notes

This program does not find CpG islands as normally defined (see cpgplot).

References

None.

Warnings

None.

Diagnostic Error Messages

None.

Exit status

0 if successful.

Known bugs

None.

See also

Program nameDescription
cpgplot Plot CpG rich areas
geecee Calculates fractional GC content of nucleic acid sequences
newcpgreport Report CpG rich areas
newcpgseek Reports CpG rich regions
As there is no official definition of what is a cpg island is, and worst where they begin and end, we have to live with 2 definitions and thus two methods. These are:

1. newcpgseek and cpgreport - both declare a putative island if the score is higher than a threshold (17 at the moment). They now also displaying the actual CpG count, the % CG and the observed/expected ration in the region where the score is above the threshold. This scoring method based on sum/frequencies overpredicts islands but finds the smaller ones around primary exons. newcpgseek uses the same method as cpgreport but the output is different and more readable.

2. newcpgreport and cpgplot use a sliding window within which the Obs/Exp ratio of CpG is calculated. The important thing to note in this method is that an island, in order to be reported, is defined as a region that satisfies the following contraints:

   Obs/Exp ratio > 0.6
   % C + % G > 50%
   Length > 200.

For all practical purposes you should probably use newcpgreport. It is actually used to produce the human cpgisland database you can find on the EBI's ftp server as well as on the EBI's SRS server.

geecee measures CG content in the entire input sequence and is not to be used to detect CpG islands. It can be usefull for detecting sequences that MIGHT contain an island.

Author(s)

This program was originally written by Gos Micklem (gos © ebi.ac.uk)
Informatics Division, European Bioinformatics Institute, Wellcome Trust Genome Campus, Hinxton, Cambridge CB10 1SD, UK

The algorithm was modified for inclusion in EGCG under the name 'CPGSPANS' by Rodrigo Lopez (rls © ebi.ac.uk)
European Bioinformatics Institute, Wellcome Trust Genome Campus, Hinxton, Cambridge CB10 1SD, UK

This application was modified for inclusion in EMBOSS by Alan Bleasby (ajb © ebi.ac.uk)
European Bioinformatics Institute, Wellcome Trust Genome Campus, Hinxton, Cambridge CB10 1SD, UK

History

Completed 22nd March 1999.

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None