|
|
polydot |
The two sequences are placed on the axes of a rectangular image and (subject to threshold conditions) wherever there is a similarity between the sequences a dot is placed on the image.
Where the two sequences have substantial regions of similarity, many dots align to form diagonal lines. It is therefore possible to see at a glance where there are local regions of similarity.
polydot compares all sequences in a set of sequences, draws a dotplot for each pair of sequences by marking where words (tuples) of a specified length have an exact match in both sequences and optionally reports all identical matches to feature files.
% polydot globins.fasta -gtitle="Polydot of globins.fasta" -graph cps Displays all-against-all dotplots of a set of sequences Word size [6]: Created polydot.ps |
Go to the input files for this example
Go to the output files for this example
Standard (Mandatory) qualifiers (* if not always prompted):
[-sequences] seqset File containing a sequence alignment
-wordsize integer [6] Word size (Integer 2 or more)
* -outfeat featout [unknown.gff] Output features UFO
-graph graph [$EMBOSS_GRAPHICS value, or x11] Graph type
(ps, hpgl, hp7470, hp7580, meta, cps, x11,
tekt, tek, none, data, xterm, png, gif)
Additional (Optional) qualifiers:
-[no]boxit boolean [Y] Draw a box around each dotplot
-dumpfeat toggle [N] Dump all matches as feature files
Advanced (Unprompted) qualifiers:
-gap integer [10] This specifies the size of the gap that
is used to separate the individual dotplots
in the display. The size is measured in
residues, as displayed in the output.
(Integer 0 or more)
Associated qualifiers:
"-sequences" associated qualifiers
-sbegin1 integer Start of each sequence to be used
-send1 integer End of each sequence to be used
-sreverse1 boolean Reverse (if DNA)
-sask1 boolean Ask for begin/end/reverse
-snucleotide1 boolean Sequence is nucleotide
-sprotein1 boolean Sequence is protein
-slower1 boolean Make lower case
-supper1 boolean Make upper case
-sformat1 string Input sequence format
-sdbname1 string Database name
-sid1 string Entryname
-ufo1 string UFO features
-fformat1 string Features format
-fopenfile1 string Features file name
"-outfeat" associated qualifiers
-offormat string Output feature format
-ofopenfile string Features file name
-ofextension string File name extension
-ofdirectory string Output directory
-ofname string Base file name
-ofsingle boolean Separate file for each entry
"-graph" associated qualifiers
-gprompt boolean Graph prompting
-gdesc string Graph description
-gtitle string Graph title
-gsubtitle string Graph subtitle
-gxtitle string Graph x axis title
-gytitle string Graph y axis title
-goutfile string Output file for non interactive displays
-gdirectory string Output directory
General qualifiers:
-auto boolean Turn off prompts
-stdout boolean Write standard output
-filter boolean Read standard input, write standard output
-options boolean Prompt for standard and additional values
-debug boolean Write debug output to program.dbg
-verbose boolean Report some/full command line options
-help boolean Report command line options. More
information on associated and general
qualifiers can be found with -help -verbose
-warning boolean Report warnings
-error boolean Report errors
-fatal boolean Report fatal errors
-die boolean Report dying program messages
|
| Standard (Mandatory) qualifiers | Allowed values | Default | |
|---|---|---|---|
| [-sequences] (Parameter 1) |
File containing a sequence alignment | Readable set of sequences | Required |
| -wordsize | Word size | Integer 2 or more | 6 |
| -outfeat | Output features UFO | Writeable feature table | unknown.gff |
| -graph | Graph type | EMBOSS has a list of known devices, including ps, hpgl, hp7470, hp7580, meta, cps, x11, tekt, tek, none, data, xterm, png, gif | EMBOSS_GRAPHICS value, or x11 |
| Additional (Optional) qualifiers | Allowed values | Default | |
| -[no]boxit | Draw a box around each dotplot | Boolean value Yes/No | Yes |
| -dumpfeat | Dump all matches as feature files | Toggle value Yes/No | No |
| Advanced (Unprompted) qualifiers | Allowed values | Default | |
| -gap | This specifies the size of the gap that is used to separate the individual dotplots in the display. The size is measured in residues, as displayed in the output. | Integer 0 or more | 10 |
The sequences may or may not be aligned.
>HBB_HUMAN Sw:Hbb_Human => HBB_HUMAN VHLTPEEKSAVTALWGKVNVDEVGGEALGRLLVVYPWTQRFFESFGDLSTPDAVMGNPKV KAHGKKVLGAFSDGLAHLDNLKGTFATLSELHCDKLHVDPENFRLLGNVLVCVLAHHFGK EFTPPVQAAYQKVVAGVANALAHKYH >HBB_HORSE Sw:Hbb_Horse => HBB_HORSE VQLSGEEKAAVLALWDKVNEEEVGGEALGRLLVVYPWTQRFFDSFGDLSNPGAVMGNPKV KAHGKKVLHSFGEGVHHLDNLKGTFAALSELHCDKLHVDPENFRLLGNVLVVVLARHFGK DFTPELQASYQKVVAGVANALAHKYH >HBA_HUMAN Sw:Hba_Human => HBA_HUMAN VLSPADKTNVKAAWGKVGAHAGEYGAEALERMFLSFPTTKTYFPHFDLSHGSAQVKGHGK KVADALTNAVAHVDDMPNALSALSDLHAHKLRVDPVNFKLLSHCLLVTLAAHLPAEFTPA VHASLDKFLASVSTVLTSKYR >HBA_HORSE Sw:Hba_Horse => HBA_HORSE VLSAADKTNVKAAWSKVGGHAGEYGAEALERMFLGFPTTKTYFPHFDLSHGSAQVKAHGK KVGDALTLAVGHLDDLPGALSNLSDLHAHKLRVDPVNFKLLSHCLLSTLAVHLPNDFTPA VHASLDKFLSSVSTVLTSKYR >MYG_PHYCA Sw:Myg_Phyca => MYG_PHYCA VLSEGEWQLVLHVWAKVEADVAGHGQDILIRLFKSHPETLEKFDRFKHLKTEAEMKASED LKKHGVTVLTALGAILKKKGHHEAELKPLAQSHATKHKIPIKYLEFISEAIIHVLHSRHP GDFGADAQGAMNKALELFRKDIAAKYKELGYQG >GLB5_PETMA Sw:Glb5_Petma => GLB5_PETMA PIVDTGSVAPLSAAEKTKIRSAWAPVYSTYETSGVDILVKFFTSTPAAQEFFPKFKGLTT ADQLKKSADVRWHAERIINAVNDAVASMDDTEKMSMKLRDLSGKHAKSFQVDPQYFKVLA AVIADTVAAGDAGFEKLMSMICILLRSAY >LGB2_LUPLU Sw:Lgb2_Luplu => LGB2_LUPLU GALTESQAALVKSSWEEFNANIPKHTHRFFILVLEIAPAAKDLFSFLKGTSEVPQNNPEL QAHAGKVFKLVYEAAIQLQVTGVVVTDATLKNLGSVHVSKGVADAHFPVVKEAILKTIKE VVGAKWSEELNSAWTIAYDELAIVIKKEMNDAA |
![[polydot results]](polydot.1.polydot.gif)
| Program name | Description |
|---|---|
| dotmatcher | Displays a thresholded dotplot of two sequences |
| dotpath | Non-overlapping wordmatch dotplot of two sequences |
| dottup | Displays a wordmatch dotplot of two sequences |