EMBOSS: cons

cons

Function

Creates a consensus from multiple alignments

Description

cons calculates a consensus sequence from a multiple sequence alignment. To obtain the consensus, the sequence weights and a scoring matrix are used to calculate a score at each position in the alignment.

The residue (or nucleotide) i in an alignment column, is compared to all other residues (j) in the column. The score for i is the sum over all residues j (not i=j) of the score(ij)*weight(j) . Where score(ij) is taken from a nucleotide or protein scoring matrix (see -datafile qualifier) and the "weight(j)" is the weighting given to the sequence j, which is given in the alignment file.

The highest scoring type of residue is then found in the column. If the number of positive matches for this residue is greater than the "plurality value" then this residue is the consensus. The positive matches for a residue i are calculated as being the sum of weights of all the residues that increase the score of residue i (i.e. positive).

Where no consensus is found at a position i, an 'n' or an 'x' character is output; (depending on it being a DNA or protein sequence).

The "plurality" qualifier allows the user to set a cut-off for the number of positive matches below which there is no consensus.

The "identity" qualifier provides the facility of setting the required number of identities at a site for it to give a consensus at that position. Therefore, if this is set to the number of sequences in the alignment only columns of identities contribute to the consensus.

The "setcase" qualifier sets the threshold for the positive matches above which the consensus is is upper-case and below which the consensus is in lower-case.

Usage

Here is a sample session with cons

% cons Creates a consensus from multiple alignments Input (aligned) sequence set: dna.msf output sequence [dna.fasta]: aligned.cons

Go to the input files for this example
Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers:
  [-sequence]          seqset     File containing a sequence alignment.
  [-outseq]            seqout     [.] Sequence filename and
                                  optional format (output USA)

   Additional (Optional) qualifiers:
   -datafile           matrix     [EBLOSUM62 for protein, EDNAFULL for DNA]
                                  This is the scoring matrix file used when
                                  comparing sequences. By default it is the
                                  file 'EBLOSUM62' (for proteins) or the file
                                  'EDNAFULL' (for nucleic sequences). These
                                  files are found in the 'data' directory of
                                  the EMBOSS installation.
   -plurality          float      [Half the total sequence weighting] Set a
                                  cut-off for the number of positive matches
                                  below which there is no consensus. The
                                  default plurality is taken as half the total
                                  weight of all the sequences in the
                                  alignment. (Any numeric value)
   -identity           integer    [0] Provides the facility of setting the
                                  required number of identities at a site for
                                  it to give a consensus at that position.
                                  Therefore, if this is set to the number of
                                  sequences in the alignment only columns of
                                  identities contribute to the consensus.
                                  (Integer 0 or more)
   -setcase            float      [@( $(sequence.totweight) / 2)] Sets the
                                  threshold for the positive matches above
                                  which the consensus is is upper-case and
                                  below which the consensus is in lower-case.
                                  (Any numeric value)
   -name               string     Name of the consensus sequence (Any string
                                  is accepted)

   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outseq" associated qualifiers
   -osformat2          string     Output seq format
   -osextension2       string     File name extension
   -osname2            string     Base file name
   -osdirectory2       string     Output directory
   -osdbname2          string     Database name to add
   -ossingle2          boolean    Separate file for each entry
   -oufo2              string     UFO features
   -offormat2          string     Features format
   -ofname2            string     Features file name
   -ofdirectory2       string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write standard output
   -filter             boolean    Read standard input, write standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages

Standard (Mandatory) qualifiers Allowed values Default

[-sequence]
(Parameter 1) File containing a sequence alignment. Readable set of sequences Required

[-outseq]
(Parameter 2) Sequence filename and optional format (output USA) Writeable sequence <*>.format

Additional (Optional) qualifiers Allowed values Default

-datafile This is the scoring matrix file used when comparing sequences. By default it is the file 'EBLOSUM62' (for proteins) or the file 'EDNAFULL' (for nucleic sequences). These files are found in the 'data' directory of the EMBOSS installation. Comparison matrix file in EMBOSS data path EBLOSUM62 for protein
EDNAFULL for DNA

-plurality Set a cut-off for the number of positive matches below which there is no consensus. The default plurality is taken as half the total weight of all the sequences in the alignment. Any numeric value Half the total sequence weighting

-identity Provides the facility of setting the required number of identities at a site for it to give a consensus at that position. Therefore, if this is set to the number of sequences in the alignment only columns of identities contribute to the consensus. Integer 0 or more 0

-setcase Sets the threshold for the positive matches above which the consensus is is upper-case and below which the consensus is in lower-case. Any numeric value @( $(sequence.totweight) / 2)

-name Name of the consensus sequence Any string is accepted An empty string is accepted

Advanced (Unprompted) qualifiers Allowed values Default

(none)

Standard (Mandatory) qualifiers	Allowed values	Default
[-sequence] (Parameter 1)	File containing a sequence alignment.	Readable set of sequences	Required
[-outseq] (Parameter 2)	Sequence filename and optional format (output USA)	Writeable sequence	<>*.format
Additional (Optional) qualifiers	Allowed values	Default
-datafile	This is the scoring matrix file used when comparing sequences. By default it is the file 'EBLOSUM62' (for proteins) or the file 'EDNAFULL' (for nucleic sequences). These files are found in the 'data' directory of the EMBOSS installation.	Comparison matrix file in EMBOSS data path	EBLOSUM62 for protein EDNAFULL for DNA
-plurality	Set a cut-off for the number of positive matches below which there is no consensus. The default plurality is taken as half the total weight of all the sequences in the alignment.	Any numeric value	Half the total sequence weighting
-identity	Provides the facility of setting the required number of identities at a site for it to give a consensus at that position. Therefore, if this is set to the number of sequences in the alignment only columns of identities contribute to the consensus.	Integer 0 or more	0
-setcase	Sets the threshold for the positive matches above which the consensus is is upper-case and below which the consensus is in lower-case.	Any numeric value	@( $(sequence.totweight) / 2)
-name	Name of the consensus sequence	Any string is accepted	An empty string is accepted
Advanced (Unprompted) qualifiers	Allowed values	Default
(none)

Input file format

The USA of a set of aligned sequences.

Input files for usage example

File: dna.msf

!!NA_MULTIPLE_ALIGNMENT

 dna.msf  MSF: 120  Type: N  January 01, 1776  12:00  Check: 3196 ..

 Name: MSFM1          Len:   120  Check:  8587  Weight:  1.00
 Name: MSFM2          Len:   120  Check:  6178  Weight:  1.00
 Name: MSFM3          Len:   120  Check:  8431  Weight:  1.00

//

        MSFM1  ACGTACGTAC GTACGTACGT ACGTACGTAC GTACGTACGT ACGTACGTAC
        MSFM2  ACGTACGTAC GTACGTACGT ....ACGTAC GTACGTACGT ACGTACGTAC
        MSFM3  ACGTACGTAC GTACGTACGT ACGTACGTAC GTACGTACGT CGTACGTACG

        MSFM1  GTACGTACGT ACGTACGTAC GTACGTACGT ACGTACGTAC GTACGTACGT
        MSFM2  GTACGTACGT ACGTACGTAC GTACGTACGT ACGTACGTAC GTACGTACGT
        MSFM3  TACGTACGTA CGTACGTACG TACGTACGTA ACGTACGTAC GTACGTACGT

        MSFM1  ACGTACGTAC GTACGTACGT
        MSFM2  ACGTACGTTG CAACGTACGT
        MSFM3  ACGTACGTAC GTACGTACGT

Output file format

The output consists of a sequence file holding the consensus sequence.

Output files for usage example

File: aligned.cons

>EMBOSS_001
ACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGT
ACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGTACGT

Data files

It uses the standard set of scoring matrix data files.

EMBOSS data files are distributed with the application and stored in the standard EMBOSS data directory, which is defined by the EMBOSS environment variable EMBOSS_DATA.

To see the available EMBOSS data files, run:

% embossdata -showall

To fetch one of the data files (for example 'Exxx.dat') into your current directory for you to inspect or modify, run:


% embossdata -fetch -file Exxx.dat

Users can provide their own data files in their own directories. Project specific files can be put in the current directory, or for tidier directory listings in a subdirectory called ".embossdata". Files for all EMBOSS runs can be put in the user's home directory, or again in a subdirectory called ".embossdata".

The directories are searched in the following order:

. (your current directory)
.embossdata (under your current directory)
~/ (your home directory)
~/.embossdata

Notes

None.

References

None.

Warnings

None.

Diagnostic Error Messages

None.

Exit status

It always exits with status 0.

Known bugs

None.

Program name	Description
megamerger	Merge two large overlapping nucleic acid sequences
merger	Merge two overlapping sequences

Author(s)

Tim Carver (tcarver © rfcgr.mrc.ac.uk)
MRC Rosalind Franklin Centre for Genomics Research Wellcome Trust Genome Campus, Hinxton, Cambridge, CB10 1SB, UK

History

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None

Function

Description

Usage

Command line arguments

Input file format

Input files for usage example

File: dna.msf

Output file format

Output files for usage example

File: aligned.cons

Data files

Notes

References

Warnings

Diagnostic Error Messages

Exit status

Known bugs

See also

Author(s)

History

Target users

Comments